Crack Paint

PRODUCT DESCRIPTION & USE

Acrylic copolymer based emulsion for interior walls, old-looking    decorative, Is a paint to have high-level effects of inhalation and washable. Can be used on Interior and exterior walls of buildings, plaster, gypsum plaster, concrete and wood surfaces.

 

KEY BENEFITS

• Applied to the surface shows an excellent adhesion properties. 
• Has a high level of inhalation property. 
• Provide buildings breathing due to the ability of disposal out humidity from inside. Is 
• Durable against wiping and can be cleaned easily.
• Not smelling because of not contain solvent and thinned with water .
• Not harmful to human and environmental health. 
• Decorative. 

 

AVAILABLE IN SIZES

In 1 kg, 3.5 kg , 10 kg , 20 kg  plastic buckets.

 

COLOUR & GLOSS RANGE

Various color options

 

FLASH POINT

Flash point of this product is 39 degrees Celsius. 

 

COMPOSITION (NOMINAL)

Pigment: Lightfast pigment

Binder: Acrylic binder

Solvent: Water

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids % 65 ± 2

Specific Gravity 1.50 ±0.05 kg/L   (@ 20 °C)

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed.

 

APPLICATION

If the surface which will be applied need the repair, be done and  all kinds of oil, dirt, dust  that will prevent adhesion  products must be cleaned. Then a layer of Southwind Decoration Primer should be applied. Then paint the desired color is applied in Southwind Decorative Funds Paints. Southwind Transparent liquid is applied as intermediate on dried funds paint. Painting process is completed  by applying desired color southwind Decorative Topcoat on prepared the ground. Southwind Primer, funds paint and top coat paint  is ready to be thinned  25-30 % with water. Southwind Transparent liquid is ready to use.  

Application Tools: Roll, brush

 

SPREADING RATE

As depending on surface uniformity and application techniques 0.050 – 0.250 kg/m²

 

REDUCTION

May be thinned by 25-30 % water

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

(At 20°C %65 HR), 

First Drying: 2 hours,

Full Drying :  24 hours.

 

 CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of can in accordance with local authority guidelines.

 

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally. If medical advice is needed, have product container or label at hand. Dispose of contents to a waste disposal facility in accordance with local/national regulations. Safety data sheet available on request.

 

STORAGE

Non-receive direct sunlight on the floor, the storage room temperature should be up 0 C and under +35 C, closed in volume, about 1 year in original unopened packaging. Keep from freezing.

 

FOLLOW US ON

Online: www.southwindpaints.com

Email: info@southwindpaints.com

Phone: +90 530 429 9233