Elastic Exterior Coating

Southwind Elastomeric Styrene Acrylic Copolymer Based, Long Lasting Exterior Coating, having full flexibility and no water permeability characteristics 

KEY BENEFITS

• Because of its higher hydrophobic characteristic, allows for draining the rain water without wetting the façade, 
• Fully elastic, and covers the cracks on the surface, 
• Not being affected by the movements, caused by the movement of building, 
• No cracking, swollen, fading of colors and well adhesion to the surfaces

 

AVAILABLE IN SIZES

In 10 kg, 20 kg, 25 kg plastic buckets

 

COLOUR & GLOSS RANGE

Various colour options, matt

 

FLASH POINT

Not applicable since this product is non-flammable

 

VOC CONTENT

Lower than EU limits

 

COMPOSITION (Nominal)

Pigment: Lightfast pigment

Binder:    Acrylic binder

Solvent:   Water

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids 71 ± 2 %

Specific Gravity            1.75 ± 0.05 gr/ml

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed. 

 

APPLICATION

After Southwind Acrylic Primer is applied to the ready surface, the last layer dye is applied in a single layer by a roll. It is recommended that it shall be applied between +5°C and 30°C.

 

SPREADING RATE

1-1.5 kg/m2 for double layer application depending on the surface situation.

 

REDUCTION

  1-2 % water may be added

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

Touch Dry 6-8 hours

 Recoat 4hours

This is dependent upon temperature and humidity. 

 

CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of buckets should be in accordance with local authority guidelines.

 

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally.

 

STORAGE

 The product should be kept in a dry place. Lid should be closed   tight when not in use. Not to be exposed to direct sunlight. Stock life is 1 year in original container. Protect from freezing.

 

FOLLOW US ON

Online: www.southwindpaints.com

Email: info@southwindpaints.com

Phone: +90 530 429 9233