Textured Silicon Based Exterior Coating
July 12, 2024
Crust Plaster
July 12, 2024
Mineral Plaster
Granite and ceramic color ready plaster. Even though it is generally known as sand plaster or mineral plaster in Turkey, it is known as the plastic wall coating abroad because of its chemical content. It is a decorative facade coating material, prepared by mixing with acrylic bindings and qualified additives by grinding the granite marble stone to the granule state.
Applied to all surfaces of the construction elements such all fine plasters, smoothly processed coarse plaster, concrete, etc.
PRODUCT DESCRIPTION & USE
Granite and ceramic color ready plaster. Even though it is generally known as sand plaster or mineral plaster in Turkey, it is known as the plastic wall coating abroad because of its chemical content. It is a decorative facade coating material, prepared by mixing with acrylic bindings and qualified additives by grinding the granite marble stone to the granule state.
Applied to all surfaces of the construction elements such all fine plasters, smoothly processed coarse plaster, concrete, etc.
KEY BENEFITS
- Good adhesion to the surface,
- Colors do not fade,
- Surface do not crack or swell,
- Over time the swelling will not spill,
- Decorative and patterned surface appearance
AVAILABLE IN SIZES
In 25 kg plastic buckets
COLOUR & GLOSS RANGE
Various colour options, matt
FLASH POINT
Not applicable since this product is non-flammable
VOC CONTENT
Lower than EU limits
COMPOSITION (Nominal)
Pigment: Lightfast pigment
Binder: Acrylic binder
Solvent: Water
SOLIDS – SPECIFIC GRAVITY
Volume Solids
Specific Gravity
SURFACE PREPARATION
The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed.
APPLICATION
After Southwind Acrylic Exterior Primer is applied to the ready surface, Southwind Mineral Plaster is applied and smoothened with a steel spatula so as being in the equal matrix with the wall.
SPREADING RATE
5-5.5 kg/m2 of fine mineral plaster depending on the surface situation or 7-7.5 kg/m2 of thick mineral plaster.
REDUCTION
Do not reduce this product
DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)
Touch Dry At 20 °C, 6-8 hours
Recoat 4 hours
This is dependent upon temperature and humidity.
CLEANING UP
Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of buckets should be in accordance with local authority guidelines.
PRECAUTIONS / WARNINGS
Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally.
STORAGE
The product should be kept in a dry place. Lid should be closed tight when not in use. Not to be exposed to direct sunlight. Stock life is 1 year in original container. Protect from freezing.
FOLLOW US ON
Online: www.southwindpaints.com
Email: info@southwindpaints.com
Phone: +90 530 429 9233
Reviews
There are no reviews yet.